Quail update

As promised, here is the update on my quail project. As those of you who have been around here for a while know, I’ve kept quail off and on for two years now, with varied results.

Based on my experience, quail have three major drawbacks that make me hate the city’s anti-chicken ordinance with the fury of ten thousand Africanized honeybees:

1. Coturnix quail chicks are incredibly stupid, which makes them difficult and frustrating to raise.

2. In addition to being tiny, quail eggs have very thin shells and very thick membranes, which makes them difficult to crack without breaking yolks and getting flecks of shell in your breakfast.

3. Coturnix quail are messy and will waste more food than they eat. I spent an outrageous amount of money on feed and bedding last year after my poor little stupid birds threw their food all over their pen instead of eating it.

I solved the first problem by purchasing adult birds from an ol’ boy out near Little Grassy Lake who raises quail for hunters to use in training bird dogs. Babies are cute and fuzzy, but adults are the only way to go if you don’t want to drive yourself crazy.

I solved the second problem by ordering a pair of quail-egg scissors from Amazon.com. No more broken yolks, and no more eggshell in my sandwiches. Best eight bucks I ever spent.

That little blade just guillotines the end of the egg right off. Handiest gadget in my kitchen, to be honest.
That little blade just guillotines the end of the egg right off. Handiest gadget in my kitchen, to be honest.
The scissors make a nice, clean cut so you can dump the egg right out into the frying pan.
The scissors make a nice, clean cut so you can dump the egg right out into the frying pan.

The third problem took a bit of research, but I was delighted beyond belief to find the solution on YouTube:

If you’re considering quail, buy yourself a cheap soldering iron and a 99-cent plastic shoebox and make this little feeder. The whole project will pay for itself in less than two weeks. (I already had a soldering iron in the garage, so my feeder paid for itself in about a day.) My birds went from wasting a cup (or more) of feed a day to maybe a teaspoon.

I live too far from Wisconsin to buy this guy the beer I owe him for sharing this design, so I’ll do the next best thing and send some traffic to his website, Homesteading Ways. Seriously — go check it out. He and his wife have some good stuff on there.

Emily

Advertisements

One thought on “Quail update”

  1. I bet a hot glue gun would work as well as the soldering iron, if that was all you had. I’m guessing you could use the hole saw to cut the holes if you used a short piece of 2×4 as a backer for the plastic so it didn’t chatter or flex while drilling, but you might have to sand the holes a little bit to keep the birds from getting hurt when they stuck their heads through to get the food.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s